Z-type cutting and folding machine

Positive/negative coil feeding, through the pole film unwinding, correction, corner cutting, pole film cutting, CCD size detection, defect detection, OK film through the vacuum skin to the stack fragment, After the lamination robot, the correction platform, the lamination platform, and the diaphragm unwinding interval are alternately Z-shaped stacked into the core, after the downline, the tail coil, the glue, the hot pressing, the short circuit test, the NG cell is discharged and the OK cell flows into the back channel.

Product features:

Complete functions - collector piece winding, punching, cutting, testing, laminating, gluing, blanking and other functions in one

The diaphragm tension is adjustable - the peak value is less than 15% when stable stacking is within 5%

No multiple pieces - The pole piece is cut and transported through the vacuum belt at intervals without multiple pieces

Fast speed - 0.45-0.6s/pcs/ station

High accuracy - CCD positioning is used for pole plate correction. The positioning accuracy is 0.05mm

High alignment - The overall alignment of the rectilinear motor and servo is ±0.4mm

High safety - the equipment has high efficiency filter and dust removal system with brush, negative pressure suction top FFU blower equipment high self-cleaning degree

Optional configuration:

1, single, double, three and four stations are optional

2, the production can be pure rounded corners or V-corners

3. CCD can be selected for cell alignment detection

4, diaphragm cutting mode can be selected hot or sawtooth cutting

5, can choose the blanking tail coil function, the number of tail coil can be set freely

6, can choose insulation resistance, thickness, weight measurement, hot pressing function

7, can choose the automatic taping function, improve the equipment operation rate, improve the degree of equipment automation

8, can be seamlessly connected with AGV, achieve a high degree of automation